THE BUYER'S GUIDE / SELECTION
Choosing DIN EN854 2TE Textile Reinforced Hydraulic Hose: Medium, Dimensions and Operating Conditions
This guide helps buyers and procurement teams evaluate whether the DIN EN854 2TE Textile Reinforced Hydraulic Hose from HEBEI SINOPULSE TECH GROUP CO.,LTD. matches their application requirements. It covers the hose's construction, compatible hydraulic media, temperature operating range, and how the 2TE design compares with the 1TE and 3TE alternatives in the same EN854 textile-reinforced family — so you can select the right hose before placing an order.
System pressure level: The 2TE uses two plies of high-tensile textile reinforcement and is suited to lower-to-medium pressure return and drain lines. Confirm the maximum working pressure and surge pressure for the specific bore size with the manufacturer before ordering; very high-pressure circuits require wire-spiral hoses.
Hydraulic medium compatibility: The inner tube is oil- and water-resistant synthetic rubber, confirmed suitable for petroleum-based hydraulic fluids, water-based fluids, oil–water emulsions, and aqueous glycol solutions. Verify with the manufacturer for any media outside this confirmed list (e.g., synthetic esters, phosphate esters).
Operating temperature range: Confirmed range is −40 °C to +100 °C, covering most industrial and cold-climate installations. Applications with sustained hose-wall temperatures above +100 °C require a higher-rated product.
Cover durability and flame resistance: The outer cover compound is weather- and oil-resistant synthetic rubber noted as FRAS approved (flame-resistant, anti-static), suitable for outdoor installations and environments where flame-resistant hose is specified.
Assembly and fitting requirements: HEBEI SINOPULSE TECH GROUP CO.,LTD. offers pre-crimped hose assemblies with customisable length, fitting type and OEM layline. Buyers should specify bore, length, end fittings, and any OEM labelling requirements at enquiry stage.
EN854 family grade selection: Compare 1TE (single-ply, hydraulic control lines), 2TE (two-ply, return/drain lines and general petroleum/water-based fluid transfer), and 3TE (two-ply, medium-pressure petroleum-based applications) against your circuit function and pressure class.
What Is the DIN EN854 2TE Textile Reinforced Hydraulic Hose?
The DIN EN854 2TE Textile Reinforced Hydraulic Hose is a two-layer textile-reinforced rubber hose built to the EN854 standard. HEBEI SINOPULSE TECH GROUP CO.,LTD. manufactures it with the following verified construction:
- Inner tube: Oil- and water-resistant synthetic rubber
- Reinforcement: Two plies of high-tensile textile braiding
- Cover: Weather- and oil-resistant synthetic rubber
- Temperature range: −40 °C to +100 °C
It is also cross-referenced as SAE100 R3 / EN854 2TE (two-fibre braided hydraulic hose), meaning hoses meeting both designations share the same two-textile-ply architecture.
Compatible Hydraulic Media
According to the confirmed product description, the DIN EN854 2TE is suitable for delivering:
- Petroleum-based hydraulic fluids (mineral oils, diesel fuels, gasoline, lubricating oils)
- Water-based hydraulic fluids (oil-and-water emulsions, aqueous glycol solutions)
This dual compatibility makes it applicable in machine-building and general hydraulic equipment where the system fluid may vary between petroleum-based and water-based media. It is not described as suitable for aggressive chemicals, high-pressure spiral-hose applications, or PTFE-dependent fluid transfer.
Key Selection Criteria
1. Pressure Level — Low to Medium Applications
The 2TE design uses two plies of high-tensile textile reinforcement. The product description positions this hose for lower-to-medium pressure applications — specifically return lines, drain lines, and general fluid conveyance lines where the operating pressure remains within the textile-reinforced range. It is not designed to replace four- or six-wire spiral hoses (e.g., EN856 4SP, EN856 4SH, SAE100 R12–R15) used in very high-pressure circuits.
Ask before ordering: Confirm your system's maximum working pressure and surge pressure against the manufacturer's pressure ratings for the specific bore size you require. Pressure specifications are not replicated here as they vary by hose I.D.; verify them with HEBEI SINOPULSE TECH GROUP CO.,LTD. directly.
2. Temperature Range
The confirmed operating range is −40 °C to +100 °C. This suits most industrial hydraulic systems operating in temperate and cold climates, as well as standard ambient-temperature manufacturing environments. Applications that regularly exceed +100 °C at the hose wall — such as some high-duty injection-moulding or furnace-adjacent circuits — would require a hose rated for higher thermal performance.
3. Hydraulic Medium Compatibility
Match the inner tube specification (oil- and water-resistant synthetic rubber) to your system fluid. The 2TE is suitable for petroleum-based and water-based hydraulic fluids, oil–water emulsions, and aqueous glycol solutions.
4. Cover Compound — Flame Resistance and Environmental Durability
The cover features a flame-resistant compound and is noted as FRAS approved (Flame Resistant Anti-Static). The weather- and oil-resistant outer rubber provides protection against ozone, UV ageing, and incidental oil spillage. This makes the 2TE suitable for above-ground industrial installations exposed to outdoor conditions as well as environments where flame-resistant hose is specified.
5. Hose Assembly and Fitting Compatibility
HEBEI SINOPULSE TECH GROUP CO.,LTD. offers custom hose assemblies — finished lengths with crimp fittings pre-attached. Buyers can specify hose type, length, and fitting type. The company's reinforced hoses are described as compatible with a wide variety of adapters and fittings. If your procurement requires ready-to-install assemblies rather than bulk hose, this option is available.
6. OEM and Branding
The product listing confirms OEM support with custom hose layline branding. This is relevant for distributors and OEM machinery builders who need private-label identification on the hose.
Comparing the EN854 Textile Hose Family: 1TE, 2TE and 3TE
HEBEI SINOPULSE TECH GROUP CO.,LTD. supplies three grades within the EN854 textile-reinforced range.
| Feature | EN854 1TE (SAE100 R6) | EN854 2TE (SAE100 R3) | EN854 3TE |
|---|---|---|---|
| Textile reinforcement plies | One | Two | Two |
| Inner tube | Oil & water resistant synthetic rubber | Oil & water resistant synthetic rubber | Oil & water resistant synthetic rubber |
| Cover | Weather & oil resistant synthetic rubber | Weather & oil resistant synthetic rubber | Weather & oil resistant synthetic rubber |
| Temperature range | −40 °C to +100 °C | −40 °C to +100 °C | −40 °C to +100 °C |
| FRAS approved | Noted | Noted | Noted |
| Primary application | Hydraulic control lines; fluid delivery | Return/drain lines; petroleum & water-based fluid transfer; machine-building | Medium-pressure petroleum-based fluid applications |
| Flame-resistant cover | Yes | Yes | Yes |
Guidance: When your circuit requires a single-ply, lower-profile hose for control lines, the 1TE is the appropriate choice. When two plies are needed to handle slightly higher working pressure or to align with machine-builder specifications calling out EN854 2TE or SAE100 R3, the 2TE is the correct selection. The 3TE description specifically calls out medium-pressure petroleum-based applications; if your fluid is exclusively petroleum-based and the system pressure is at the upper bound of the textile-hose range, the 3TE warrants evaluation.
Application Suitability Summary
The DIN EN854 2TE Textile Reinforced Hydraulic Hose is well-suited to:
- Machine-building and hydraulic equipment return and drain lines
- Systems conveying petroleum-based or water-based hydraulic fluids, oil–water emulsions, and aqueous glycol solutions
- Installations requiring a flame-resistant, weather-resistant outer cover (FRAS-approved compound)
- OEM assemblies requiring custom layline or pre-crimped fittings
- Environments operating between −40 °C and +100 °C
It is not described as suitable for:
- Very high-pressure spiral-hose circuits (refer to EN856 4SP/4SH or SAE100 R12–R15)
- Applications requiring PTFE lining for aggressive chemical media
- Fluid temperatures sustained above +100 °C
How to Specify Your Order
When requesting a quotation from HEBEI SINOPULSE TECH GROUP CO.,LTD., provide the following information to ensure the correct hose and assembly are supplied:
- Hose standard required: DIN EN854 2TE (or SAE100 R3 cross-reference)
- Nominal bore (I.D.): Specify in mm or inch; pressure ratings vary by bore
- System working pressure and surge pressure (bar or PSI)
- Hydraulic medium: Confirm whether petroleum-based, water-based, emulsion, or glycol
- Operating temperature range in your installation
- Hose length and quantity (bulk hose or pre-crimped assemblies)
- Fitting type and end configuration if ordering assemblies
- OEM layline or labelling requirements, if applicable
About HEBEI SINOPULSE TECH GROUP CO.,LTD.
HEBEI SINOPULSE TECH GROUP CO.,LTD. (operating as Sinopulse) is a hydraulic hose and fitting manufacturer established in 2011. The company supplies a broad range of hydraulic hoses — from single-wire braided types to six-wire spiral hoses — as well as complete hose assemblies. Its product range includes the full EN854 textile-reinforced family (1TE, 2TE and 3TE) alongside SAE100 and DIN series products. Custom assemblies and OEM support are available.
THE COMPANY
HEBEI SINOPULSE TECH GROUP CO.,LTD.
Sinopulse is a renowned company that has been a leading industrial pipe, various hose fittings, and hydraulic hose manufacturer since its establishment in 2011. Founded by three brothers Cao, the company has grown from strength to strength, establishing itself as a key player in the industry.…
About Us ↗Visit company website ↗YOUR NEXT STEP
Bring your brief. Start a useful conversation.
Use case, specification, quantity and delivery window: make the next conversation specific.
Product Application













