Your Trusted 24 Hours Service Provider!
  • sns01
  • sns02
  • sns04
  • sns06
  • social (2)
Pressure Rubber Hose FAQ for Sandblasting Applications

Pressure Rubber Hose FAQ for Sandblasting Applications

Answers buyer questions about the Pressure Abrasion Sandblast Rubber Hose, including abrasive-media compatibility, eight available sizes, pressure ratings, temperature range, static conductivity, construction, and purchase details.

Pressure Rubber Hose FAQ for Sandblasting Applications
Illustration for reference; see the product page for actual photos and specifications.

The Pressure Abrasion Sandblast Rubber Hose is made for abrasive blast applications where sand, steel shot, or other abrasive media move through the hose at high velocity. This FAQ covers the practical checks buyers should make before selecting a pressure rubber hose for a blast setup.

Which media can this pressure rubber hose handle?

The hose is designed for the delivery of sand, steel shot, and other abrasive materials used in building maintenance, restoration, and the cleaning or finishing of metal parts, stone, and glass. Its extra-thick tube supports internal abrasion resistance, while the cover is abrasion resistant for external service conditions.

Picture a blast line carrying abrasive media across a work area. The hose is intended for that type of transfer, including applications where the line may face external abuse. Match the hose to the abrasive material and blast equipment connection before ordering.

What sizes are available?

The Pressure Abrasion Sandblast Rubber Hose is available in eight inside diameters:

  • 3/4 inch, 19.1 mm, model SB300-12
  • 1 inch, 25.4 mm, model SB300-16
  • 1-1/4 inches, 31.8 mm, model SB300-20
  • 1-1/2 inches, 38.2 mm, model SB300-24
  • 2 inches, 50.8 mm, model SB300-32
  • 2-1/2 inches, 64.0 mm, model SB300-40
  • 3 inches, 76.0 mm, model SB300-48
  • 4 inches, 102.0 mm, model SB300-64

The outside diameters range from 34.0 mm to 127.6 mm across these sizes. For a replacement line, compare the inside diameter with the equipment outlet, coupling, and required media path. Measure routing space around the blast cabinet, work area, or maintenance zone against the outside diameter before ordering.

What pressure rating should I use?

The working pressure is 20 bar, or 300 psi, for these SB300 sizes. The burst pressure is 60 bar, or 900 psi, with a 3:1 safety ratio.

Use the working pressure as the selection reference for the operating system. Burst pressure is a product rating, not a target operating pressure. Include the intended operating pressure, hose size, and connection details when requesting a quotation so the hose can be matched to the assembly.

Can it handle temperature changes in a work area?

The temperature range is -40°C to +70°C, or -40°F to +158°F. Check the temperature of the conveyed material and the surrounding work area, especially when the hose is routed near heated equipment or exposed to cold outdoor conditions.

Is the hose suitable for applications with static electricity concerns?

The tube is static conductive and is designed to dissipate static electricity to prevent dangerous shocks during abrasive blast service. The complete installation still needs suitable equipment connections and site safety practices for the blast system.

How is the hose built for abrasive service?

The tube is black, smooth NR synthetic rubber. Multiple plies of high-strength synthetic fabric reinforce the hose. The black cover is smooth, wrapped, and made from abrasion-resistant NR synthetic rubber. The hose is also kink resistant and designed to withstand external abuse and internal abrasion.

For a line that crosses a busy maintenance area, plan the route so the hose is not repeatedly bent or dragged against sharp edges. Check the required bend path and connection layout with the hose size before ordering.

What product details should be included in a purchase inquiry?

Provide the selected model or inside diameter, required length, working pressure, operating temperature, conveyed abrasive, and connection details. For example, SB300-32 has a 2-inch inside diameter, 72.2 mm outside diameter, 20 bar working pressure, 60 bar burst pressure, and six reinforcement plies.

These details help align the pressure rubber hose with the blast equipment and the installation route. If the hose will be used as a replacement, include a drawing or clear measurements of the existing hose ends and the quantity required.

The company

HEBEI SINOPULSE TECH GROUP CO.,LTD.

Sinopulse is a renowned company that has been a leading industrial pipe, various hose fittings, and hydraulic hose manufacturer since its establishment in 2011. Founded by three brothers Cao, the company has grown from strength to strength, establishing itself as a key player in the industry.…

About Us ↗Visit company website ↗

Your next step

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

OUR LATEST NEWS
Strict quality control strict production team to ensure stable products quality. Scientific personnel management, efficient production arrangements to ensure our timely delivery.

Product Application

  • Hydraulic Hose Application
  • Industrial Hose Application
  • Silicone Rubber Hose Application
  • Pressure Washing Hose Application
  • industrial hose application -1
  • crimping machine-1
  • Hydraulic hose pressure hose -1
  • gasoline hose -2

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.