Your Trusted 24 Hours Service Provider!
  • sns01
  • sns02
  • sns04
  • sns06
  • social (2)
Hydraulic Hose for Sale: DIN EN854 3TE vs 2TE Textile Reinforced Hose

Hydraulic Hose for Sale: DIN EN854 3TE vs 2TE Textile Reinforced Hose

HEBEI SINOPULSE TECH GROUP CO.,LTD.JOURNAL / SIDE BY SIDE

SIDE BY SIDE

Hydraulic Hose for Sale: DIN EN854 3TE vs 2TE Textile Reinforced Hose

This comparison examines the construction, fluid scope, temperature range, pressure/application positioning, and fitting considerations for DIN EN854 3TE and DIN EN854 2TE textile reinforced hydraulic hoses. Both products have two high-tensile textile reinforcement layers and oil- and water-resistant synthetic rubber components. The 3TE is for medium-pressure petroleum-based hydraulic-fluid service, while the 2TE is for lower-pressure, return, drain, and related hydraulic lines.

Hydraulic Hose for Sale: DIN EN854 3TE vs 2TE Textile Reinforced Hose
AI-generated illustration; not a real product photograph, specification, operating permission or test certificate.
01

DIN EN854 3TE Textile Reinforced Hydraulic Hose

02

DIN EN854 2TE Textile Reinforced Hydraulic Hose

Scope of this hydraulic hose comparison

When evaluating hydraulic hose for sale, comparing the hose construction and the intended service conditions is more useful than treating the product names as interchangeable. This review compares the DIN EN854 3TE Textile Reinforced Hydraulic Hose with the DIN EN854 2TE Textile Reinforced Hydraulic Hose using the same criteria.

The comparison covers construction, fluid compatibility, temperature information, pressure/application positioning, and connection considerations.

At-a-glance comparison

CriterionDIN EN854 3TE Textile Reinforced Hydraulic HoseDIN EN854 2TE Textile Reinforced Hydraulic Hose
ReinforcementTwo high-tensile textile layersTwo high-tensile textile layers
Inner tubeOil- and water-resistant synthetic rubberOil- and water-resistant synthetic rubber
CoverWeather- and oil-resistant synthetic rubberWeather- and oil-resistant synthetic rubber
Stated temperature range-40°C to +100°C-40°C to +100°C
Documented application positioningMedium-pressure delivery of petroleum-based hydraulic fluidsLower-pressure service, including return and drain lines
Fluid scope in the excerptPetroleum-based hydraulic fluids; the product description also mentions water-based fluids and other mediaPetroleum- or water-based hydraulic fluids, oil and water emulsions, and aqueous glycol solutions
Connection dimensions
Custom assembly informationCustom hose length and fittings are described as availableCustom hose length and fittings are described as available

1. Construction and materials

The two products are closely aligned in their documented basic construction. Each is described with an oil- and water-resistant synthetic rubber inner tube, two high-tensile textile reinforcement layers, and a weather- and oil-resistant synthetic rubber cover. The approved excerpts therefore do not establish a construction difference based on the number of textile reinforcement layers.

2. Pressure and application fit

The clearest documented distinction is the stated application positioning. The 3TE product is described for delivering petroleum-based hydraulic fluids in medium-pressure applications. The 2TE product is described for lower-pressure applications, including return and drain lines, and for machine-building and hydraulic-equipment use.

This distinction is a selection criterion, not a general performance ranking. A procurement team should match the hose to the system’s required pressure rating, fluid, temperature, routing, bend conditions, and assembly specification.

3. Fluid compatibility

The 3TE description identifies petroleum-based hydraulic fluids as its main application and also references petroleum- and water-based hydraulic fluids. The 2TE description lists petroleum- or water-based hydraulic fluids, oil and water emulsions, and aqueous glycol solutions.

These products have different stated scopes, but they do not replace a fluid-compatibility check for a specific formulation, concentration, temperature, or duty cycle.

4. Temperature range and cover information

Both products have a temperature range of -40°C to +100°C. Both also have a synthetic rubber cover with resistance to weather and oil.

5. Connection dimensions and custom assemblies

Both product descriptions state that custom hose assemblies can be made with specified lengths and fittings. For a purchase request, provide at least the required hose type, nominal size, assembly length, end-connection details, fluid, operating pressure, operating temperature, and routing constraints. The available product information supports discussing custom lengths and fittings, but it does not confirm that a particular connection will fit a specific machine.

For a direct product reference, see the DIN EN854 3TE Textile Reinforced Hydraulic Hose and compare the requested assembly details with the corresponding 2TE specification before placing an order.

Which documented profile fits your requirement?

  • Choose the 3TE profile when the requirement is medium-pressure delivery of petroleum-based hydraulic fluid.
  • Choose the 2TE profile when the requirement is lower-pressure service, such as a return or drain line, and the fluid scope matches the application.

Buyer checklist for hydraulic hose for sale

Before comparing quotations, ask the supplier to confirm:

  1. The exact DIN EN854 hose designation and revision or product version.
  2. Nominal bore and dimensional data.
  3. Working pressure and any applicable pressure limitations for the actual temperature and fluid.
  4. Inner-tube compatibility with the intended hydraulic medium.
  5. Hose length, end fittings, thread or connection standard, and crimp requirements.
  6. The assembly’s operating temperature and routing or bend conditions.
  7. Any documentation required for the destination market or equipment manufacturer.

The construction and application comparison does not establish a universal winner. Final selection depends on the system requirements.

THE COMPANY

HEBEI SINOPULSE TECH GROUP CO.,LTD.

Sinopulse is a renowned company that has been a leading industrial pipe, various hose fittings, and hydraulic hose manufacturer since its establishment in 2011. Founded by three brothers Cao, the company has grown from strength to strength, establishing itself as a key player in the industry.…

About Us ↗Visit company website ↗

YOUR NEXT STEP

Bring your brief. Start a useful conversation.

Use case, specification, quantity and delivery window: make the next conversation specific.

OUR LATEST NEWS
Strict quality control strict production team to ensure stable products quality. Scientific personnel management, efficient production arrangements to ensure our timely delivery.

Product Application

  • Hydraulic Hose Application
  • Industrial Hose Application
  • Silicone Rubber Hose Application
  • Pressure Washing Hose Application
  • industrial hose application -1
  • crimping machine-1
  • Hydraulic hose pressure hose -1
  • gasoline hose -2

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.