Your Trusted 24 Hours Service Provider!
  • sns01
  • sns02
  • sns04
  • sns06
  • social (2)
Hydraulic hose crimping machine comparison: SNP-32D-plus or SNP-32D?

Hydraulic hose crimping machine comparison: SNP-32D-plus or SNP-32D?

TECHNICAL NOTECOMPARISON

Key data

Hose size and swagging range
Master die shoe length
Standard and alternative voltage
Motor power
Pump flow

Abstract

SNP-32D-plus and SNP-32D share a 1/4-inch to 2-inch crimping range, 380V/50Hz standard voltage, 4kW motor power, and the same footprint and weight. The choice turns on their control layout, pump specification, crimping force, and stated hourly output.

Hydraulic hose crimping machine comparison: SNP-32D-plus or SNP-32D?
Illustration for reference; see the product page for actual photos and specifications.
§1

The shared working envelope

Both models are hydraulic hose crimping machines for high-pressure rubber hose assemblies used with construction machinery, agricultural machinery, and industrial equipment. Each handles hose sizes from 1/4” to 2” and has a 85mm master die shoe length.

The common installation figures are also close enough for a direct workshop check: both machines measure 650mmx500mmx1300mm, weigh 350KG without oil, and use 380V/50Hz standard voltage with 4kW motor power. Both also support an alternative 220V/2.2kW configuration.

§2

Side-by-side specifications

CriterionSNP-32D-plusSNP-32D
Hose size1/4” to 2”1/4” to 2”
Swagging range4-87mm6-87mm
Master die shoe length85mm85mm
Standard voltage380V/50Hz380V/50Hz
Motor power4kW4kW
Pump15L/min19L/min
Number of swagging/hour8001000
Noise level70dB70dB
Max opening¤+34mm¤+34mm
Crimping force5600kN5260kN
Dimensions, L × W × H650mmx500mmx1300mm650mmx500mmx1300mm
Weight without oil350KG350KG
§3

Control and die handling

SNP-32D-plus uses a rotating control panel, foot pedal, quick-change tools for die changes, and magnetic die connections. This layout suits a workshop that wants the operator to position the controls around the work area while changing dies frequently.

SNP-32D uses a precision control device with a signal lamp, a die set rack, quick-change tools, and magnetic die connections. Its die set rack gives the operator a defined place to keep the tooling beside the machine.

Both models use digital control and an electrical ruler with a stated crimping precision of 0.01mm. Choose between the two control layouts according to how you arrange the operator, hose, fittings, and die storage around the machine.

§4

Pump, force, and output fit

The specification table separates the hydraulic and production figures. SNP-32D-plus has a 15L/min pump, 5600kN crimping force, and a stated output of 800 swagging operations per hour. SNP-32D has a 19L/min pump, 5260kN crimping force, and a stated output of 1000 swagging operations per hour.

These figures point to different checks for a workshop order. Match the crimping force and swagging range to the hose and fitting combinations you process, then compare the stated hourly output with your planned work mix. Do not use the output figure alone to select a machine, because hose size, fitting setup, and die changes affect the work sequence.

Which one suits whom

SNP-32D-plus suits workshops that prefer a rotating control panel and need the listed 4-87mm swagging range. SNP-32D suits workshops that prioritize its 19L/min pump, die set rack, and stated 1000 swagging operations per hour.

The two options

Hose Crimping Machine SNP-32D-plusHose Crimping Machine SNP-32D

Which model suits your workshop?

Choose SNP-32D-plus when the rotating control panel, foot pedal, and 4-87mm swagging range fit your workstation and hose program. Its 5600kN crimping force is the higher of the two listed forces.

Choose SNP-32D when the 6-87mm swagging range, 19L/min pump, die set rack, and 1000 swagging operations per hour match your production plan. The two models share the same external dimensions, standard electrical specification, hose size range, and weight, so those factors do not separate them.

Before ordering a hydraulic hose crimping machine, send us the hose sizes, fitting types, target operating voltage, and expected work mix. We can then match the machine configuration and die arrangement to your workshop.

The company

HEBEI SINOPULSE TECH GROUP CO.,LTD.

Sinopulse is a renowned company that has been a leading industrial pipe, various hose fittings, and hydraulic hose manufacturer since its establishment in 2011. Founded by three brothers Cao, the company has grown from strength to strength, establishing itself as a key player in the industry.…

About Us ↗Visit company website ↗
Next:

This is the last article

OUR LATEST NEWS
Strict quality control strict production team to ensure stable products quality. Scientific personnel management, efficient production arrangements to ensure our timely delivery.

Product Application

  • Hydraulic Hose Application
  • Industrial Hose Application
  • Silicone Rubber Hose Application
  • Pressure Washing Hose Application
  • industrial hose application -1
  • crimping machine-1
  • Hydraulic hose pressure hose -1
  • gasoline hose -2

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.